Manufacturer 330W Portable Power Station 78000mAh Wireless Charging Power Generator with LCD Display AC DC Dual USB for Camping Outdoor Emergency Travel

Product Description

Specification

 

Circuit Protection
No	Items	Parameter	Standard
1	Over-charging Protection	Protection Voltage	4.25V
		Recovery voltage	4.15V
		Protection delay time	2s
2	Over-discharging Protection	Protection Voltage	2.8V
		Recovery voltage	3.0V
		Protection delay time	2s
3	Over-current Protection	discharge over-current protection	20A
		discharge over-current protection delay time	1s
4	Short-circuit Protection	Recovery conditions	Recharge after short circuit release
5	Balanced loop	Balanced start voltage	4.19V
		Balanced current	127mA

 
Functional Description:

AC output:

1.Press theAC outputbutton;

2.TheACoutput indicatorshowsblueandcan be loaded.If theindicatorisoffand the buzzer sounds,theAC outputis faulty.

DCoutput:Connect theload to DCportsdirectly.When thereis no load, theDCport isin the sleepstate.

Droneoutput:Connect the droneport to the dronechargerdirectlybypressing the positive and negativepoles.

DCinput:Connectthe chargingadapterandACsocketto the chargingportoftheportable 8 Lithium Battery Expert 15 Years power station for charging, the battery indicator shows the power when charging; disconnect all loads when charging;
 

Performance Test:

1.Standard testconditions

The test productmust be a new product that has not been shipped for more than one month and the battery has not been cycle chargeand dischargemore than 5 times.Unless otherwise specified, the tests in this specification shall be under the following conditions:Temperature:23ºC±2ºC;

Relative humidity:45%~85%RH;

Atmospheric pressure:86kPa~106kPa;

2.Measurement Apparatus

(1)Dimension Measuring Instrument

The dimension measuring shall be implemented by instruments with equal or more precision scale of 0.01mm;

(2)Voltmeter Standard class specified in the national standard or more sensitive class having inner 7 Lithium Battery Expert 15 Years impedance not less than 10kΩ /V

(3)Ammeter

Standard class specified in the national standard or more sensitive class.Totalexternal resistance including ammeter and wire is less than 0.01Ω\

(4)The resistance test method is the AC impedancemethod (AC 1kHz LCR).

The resistance isnot a constant value and varies with temperature and saturationof the stateofcharge,and relatedto length and capacityof thecable.

(5)All testing equipment and measuring instrument smust be inspected by the certification institutes;

(6) Battery test system current accuracy should be within ±0.1%, constant pressureaccuracy within ±0.5%, timing accuracy within ±0.1%;

(7)The temperature measuring instrument should not be lower than ±0.5°C;

 

Product Description

 
 

Company Profile

More than 15 Years' Experience in Lithium Battery

Mica Power Co. Ltd was established in 2009. Our management team has more than 15 years' experience in rechargeable battery. Our factory covers an area of 15,000 square meters and has more than 500 employees.

 

Meeting Quality Standards

Our company has passed ISO 9001:2015 quality and BSCI system approval and our products have got the ROHS, CE, UL, IEC, UN38.3 certifications. The battery products have the advantages of high energy density, high power density, small volume, light weight, long service life, low self-discharge, flexible and varied shapes, safety performance and so on.

 

Different Kinds of Rechargeable Batteries and Packs
Our products are polymer li-ion batteries, li-ion batteries, LiFePO4 battery packs, portable power station, energy storage
station, etc.

 

Exporting to Various Countries
Our products are selling not only in domestic market, but also sold to other countries in Asia, Europe, the Middle East, South and North America.

 

Factory

Exhibition

Main customers

Certificates

Packaging & Shipping

 

FAQ 

Q1: Can we get samples for test?
A: Yes, we can supply samples, and buyer pay for sample cost and shipping cost.

 

Q2: What is the MOQ ?
A: LiFepo4 battery is 50pcs/100pcs.
    Li ion battery is 2000pcs/3000pcs.
    More quantity has better price.

 

Q3: Can you accept OEM and ODM Service?
A: Yes, it's available.

 

Q4: What about the lead time?
A: Sample needs ~2wks , mass production time needs 2wks-4wks.

 

Q5: How do I track my shipment?
A: After we deliver your goods, we will send you the tracking No. once your goods has been shipped.